Konica Minolta DiMAGE G600 Instruction Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Digital Camera
  5. DiMAGE G600
  6. Instruction manual

Konica Minolta DiMAGE G600 Instruction Manual

Konica minota digital camera instruction manual g600
Hide thumbs Also See for DiMAGE G600:
Table of Contents

Advertisement

Quick Links

E

INSTRUCTION MANUAL

9222-2744-11 IM-A402/0403

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta DiMAGE G600

Summary of Contents for Konica Minolta DiMAGE G600

  • Page 1: Instruction Manual

    INSTRUCTION MANUAL 9222-2744-11 IM-A402/0403...

  • Page 2: Before You Begin

    Before you begin Thank you for purchasing this Konica Minolta product. Please take the time to read through this instruction manual so you can enjoy all the features of your new digital camera. Check the packing list before using this product. If any items are missing, immediately contact your camera dealer.

  • Page 3: For Proper And Safe Use

    For proper and safe use Lithium-ion batteries This camera operates on a small, but powerful lithium-ion battery. Misuse or abuse of the lithium- ion battery can cause damage or injury through fire, electric shock, or chemical leakage. Read and understand all warnings before using the battery. DANGER •...
  • Page 4 General warnings and cautions Read and understand the following warnings and cautions for safe use of the digital camera and its accessories. WARNING • Only use the battery specified in this manual. • Only use the specified charger or AC adapter within the voltage range indicated on the unit. An inappropriate adapter or current may cause damage or injury through fire or electric shock.
  • Page 5 • Take the product to a Konica Minolta service facility when repairs are required. • Handling the cord on this product may expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.
  • Page 6 CAUTION • Do not use or store these products in a hot or humid environment such as the glove compartment or trunk of a car. It may damage the camera, charger, and battery which may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid. •...
  • Page 7 This Class B digital apparatus complies with Canadian ICES-003. FCC Compliance Statement Declaration on Conformity Responsible Party: Konica Minolta Photo Imaging U.S.A. Inc. Address: 725 Darlington Avenue, Mahwah, NJ 07430 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con- ditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 8: Table Of Contents

    Table of contents The getting up and running section covers how to prepare the camera for use. It contains important information about power supplies and memory cards. The basic operation of this camera is covered in the recording – basic operation section between pages 22 and 30, and the playback – basic operation section between pages 32 and 34.
  • Page 9 Playback – basic operation...32 Single-frame playback display ...32 Viewing images ...33 Deleting images...33 Display button – playback...33 Index playback ...34 Enlarged playback...34 Recording – advanced operation...35 Navigating the recording menu ...35 Resolution – image size and compression ...36 Movie recording...38 Exposure compensation...39 White balance...40 AE metering modes...41...
  • Page 10 Playback – advanced operation ...55 Playing back movies and audio ...55 Navigating the playback menu...56 Frame-selection screen...57 Index...57 Copy ...58 Delete ...60 Adjusting the monitor ...61 DPOF ...62 Protect ...64 Move...66 Resize ...68 Slide show ...69 Add audio recording...69 Setup menu ...70 Navigating the setup menu ...70 Format ...71 Recording menu setup ...72...
  • Page 11 Data-transfer mode...83 System requirements ...83 Connecting the camera to a computer ...84 Connecting to Windows 98 and 98SE ...85 Automatic installation ...85 Manual installation ...86 Memory card folder organization ...88 Disconnecting the camera from the computer ...90 Windows 98 and 98SE ...90 Windows Me, 2000 Professional, and XP ...90 Macintosh ...91 PictBridge...92...

  • Page 12: Names Of Parts

    Names of parts * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 99). Shutter-release button Flash (p. 28) Microphone Viewfinder window* Lens cover / Main switch...
  • Page 13 Playback button (p. 32) Display button (p. 27, 33) Delete button (p. 33) LCD monitor* Menu button Controller Viewfinder* Indicator lamps Zoom buttons (p. 23) Speaker Strap eyelet (p. 20) USB-port...

  • Page 14: Getting Up And Running

    Getting up and running Charging the battery Before the camera can be used, the lithium-ion battery must be charged. Before charging the bat- tery, read the safety warnings on pages 3 and 4 of this manual. Only recharge the battery with the supplied battery charger.

  • Page 15: Inserting A Battery

    Inserting a battery This digital camera uses one NP-600 lithium-ion battery. Before using the battery, read the safety warnings on pages 3 and 4 of this manual. When replacing the battery, the camera should be turned off. Slide the battery-chamber door toward the side of the camera to release the safety catch (1).

  • Page 16: Battery-Condition Indicator

    Battery-condition indicator This camera is equipped with an automatic battery-condition indicator. It is displayed in the bottom left corner of the LCD monitor when the camera is on. Full-battery indicator – the battery is fully charged. Low-battery indicator – battery power is low. The battery should be recharged as soon as possible.

  • Page 17: Ac Adapter (Sold Separately)

    AC adapter (sold separately) Always turn off the camera before chang- ing between power supplies. The AC adapter allows the camera to be pow- ered from a household outlet. The AC adapter is recommended when the camera is interfaced with a computer or during periods of heavy use. AC adapter model AC-8U is for use in North America, Taiwan and Japan;...

  • Page 18: Installing And Removing A Memory Card

    Installing and removing a memory card Always turn off the camera and confirm the indicator lamps are out before chang- ing the memory card, otherwise the card may be damaged, and data lost. An SD Memory card, MultiMediaCard, or Memory Stick must be inserted for the camera to operate.

  • Page 19: About Memory Cards

    About memory cards The response time during recording and playback is longer with MultiMediaCards compared with SD Memory Cards. This is not a defect, but rather due to the specifications of the cards. When using large capacity cards, some operations like deletion may take longer. The SD Memory Cards and Memory Sticks have a write-protect switch to prevent image data from being deleted.

  • Page 20: Turning The Camera On And Off

    Turning the camera on and off Attaching the strap GETTING UP AND RUNNING Slide the lens cover in the direction indicated to turn on the camera; the lens extends automatically. Do not touch or hinder the lens while it is extending. To turn off the camera, push the cover toward the lens;...

  • Page 21: Setting The Language, Date, And Time

    Setting the language, date, and time LANGUAGE JAPANESE ENGLISH FRANCAIS DEUTSCH LANGUAGE SET OK? ENGLISH 2004 Year 01 Month 01 Day 00 Hour 00 Min yy/mm/dd After initially inserting a memory card and charging the battery, the menu language and the camera’s clock and calendar must be set on the setup menu.

  • Page 22: Recording - Basic Operation

    Recording mode – Basic operation This section covers basic recording operation. To prepare the camera for use, read pages 14 through 21. Handling the camera While using the viewfinder or LCD monitor, grip the camera firmly with your right hand while supporting the camera body with your left. Keep your elbows at your side and your feet shoulder-width apart to hold the camera steadily.

  • Page 23: Using The Zoom Lens

    Using the zoom lens This camera is equipped with a 8 – 24mm zoom lens. This is equivalent to a 39 to 117mm lens on a 35mm camera. The lens is operated by the zoom buttons on the back of the camera. The effect of the optical zoom is visible in both the viewfinder and LCD monitor.

  • Page 24: Basic Recording Operation

    Basic recording operation RECORDING – BASIC OPERATION Place the subject within the AF area. The focus-lock function (p. 25) can be used with off-center sub- jects. If the subject is closer than 1m (3ft.) at the zoom lens’ wide- angle position or 3m (10ft) at the telephoto position, only use the LCD monitor to frame the subject.

  • Page 25: Focus Lock

    Focus lock The focus-lock function is used when you want to compose the image with the subject off-center and outside the AF area. Focus lock may also be used when a special situation prevents the cam- era from focusing on the subject (p. 26). This function is controlled with the shutter-release button. For information on continuous-advance focus lock, see page 80.

  • Page 26: Focus Signals

    Focus signals This digital camera has a quick, accurate autofocusing system. The green indicator lamp next to the viewfinder indicates the focus status. The shutter can be released regardless if the camera can focus on the subject or not. Focus confirmed – the green indicator lamp glows. Focus is locked.

  • Page 27: Display Button - Recording Mode

    Display button – Recording mode The display button (1) controls the LCD monitor display. The display cycles to the next format each time the button is pressed: standard display, live image only, and monitor off. Monitor Standard display Live image only Battery power can be conserved by turning the monitor off and using the viewfinder to take pic- tures.

  • Page 28: Flash Modes

    Flash modes The flash can be used when taking still images. To select the flash mode, press the right key of the controller (1) until the appropriate mode is displayed. The active flash mode is displayed in the top left corner of the LCD monitor. Autoflash –...

  • Page 29: Flash Range - Automatic Operation

    Flash cancel – the flash will not fire. Use flash cancel when flash photography is prohibited, natural light is desired to illuminate the subject, or the subject is beyond the flash range. Camera Notes The slow-sync. option in the recording menu specifies the minimum shutter speed used with a particular flash mode to control camera shake.

  • Page 30: Focus Modes And Self-Timer

    Focus modes and self-timer Macro and landscape focus modes as well as a self-timer can be selected by pressing the left key of the controller (1) until the appropriate mode is displayed. The active mode is displayed in the top left corner of the LCD monitor. Macro –...

  • Page 31: Deleting Images

    Self-timer – for self-portraits. The self-timer delays the release of the shutter for ten seconds. Set the camera on a tripod and confirm the sub- ject will be within the AF area when the shutter releases; focus is determined just before the exposure.

  • Page 32: Playback - Basic Operation

    Playback – Basic operation Images are viewed in the playback mode. This section covers the basic playback operation. The playback mode has additional functions, see page 55. Press the playback button to view recorded images. Images can be viewed directly from the recording mode or when the lens cover is closed. When the cover is closed, press and hold the playback button for a few seconds until the monitor activates.

  • Page 33: Viewing Images

    Viewing images In playback mode, use the left/right keys of the controller (1) to scroll through the images on the memory card. Deleting images To delete a displayed file or all files in the memory location indicated at the top of the image, press the delete button. A confirmation screen appears.

  • Page 34: Index Playback

    Index playback To view the recorded images in a 9-frame index, press the wide-angle zoom button (1). The images are grouped by the memory card which is indicated on the first frame of the group. The frame number of the image is displayed. The controller moves the red border among the images.

  • Page 35: Recording - Advanced Operation

    Recording – Advanced Operation Navigating the recording menu Navigating the menu is simple. The menu button turns the menu on. The controller moves the cur- sor and changes settings on the menu. Pressing the menu button selects menu options and sets adjustments.

  • Page 36: Resolution - Image Size And Compression

    Resolution – Image size and compression Image size and the compression rate are set with the resolution option in the recording menu. See navigating the recording menu section on page 35. Changing image size affects the number of pixels in each image. The greater the image size, the larger the file size.
  • Page 37 The new image size and compression rate is displayed on the live monitor image. If image resolution is changed, the frame counter displays the approximate number of images that can be recorded at that setting on the installed memory card. The number of images that can be stored on a memory card is determined by the size of the card and the file size of the images, how- ever no more than 999 images can be recorded on one memory card.

  • Page 38: Movie Recording

    Movie recording This camera can record up to 30 seconds 320x240 of digital video with sound at approximately 180KB/s. Movie recording is activated with the recording menu, see the navigating the recording menu section on page 35. The digital zoom cannot be used and the monitor cannot be turned off. Use the up/down keys of the controller to highlight the movie option.

  • Page 39: Exposure Compensation

    Exposure compensation The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±1.5Ev in 0.3 increments. Exposure compensation is set in the recording menu (p. 35). When set to any value other than 0.0, the exposure-compensation value remains in the top left corner of the monitor as a warning.

  • Page 40: White Balance

    White balance White balance is the camera’s ability to make different types of lighting appear neutral. One auto- matic and four preset white-balance setting are available. White balance is set in the recording menu (p. 35). The automatic white balance compensates for the color temperature of a scene. Auto white balance is sufficient in most cases.

  • Page 41: Ae Metering Modes

    AE Metering modes The AE metering mode controls how light is measured. This is set in the recording menu (p. 35). Use the up/down keys of the controller to highlight the AE option. Press the right controller key to continue. Use the up/down keys to select the new setting.

  • Page 42: Monochrome

    Monochrome Monochrome creates black and white images. The B&W mode produces neutral monochrome images. Sepia creates warm-tone monochrome images. This mode is set in recording menu (p. 35). The live image on the monitor reflects the selected mode. The monochrome mode has no effect on image file size.

  • Page 43: Digital Zoom

    Digital zoom The digital zoom is activated in the recording menu (p. 35). The digital zoom increases the magnifi- cation of the greatest telephoto setting of the optical zoom by 2X and 3X. Although the images recorded with the digital zoom are interpolated to the set image size, the quality of the images may not be equal to images taken without the digital zoom;...

  • Page 44: Adjusting The Monitor

    Adjusting the monitor The monitor brightness and color can be adjusted with the recording menu (p. 35) or playback menu (p. 56). Use the up/down keys of the controller to highlight the monitor adj. option on the recording or playback menu. Press the right controller key to continue.

  • Page 45: Voice Recording

    Voice recording A maximum of 30 seconds of audio can be recorded. Voice recording is activated with the recording menu, see the navigating the recording menu section on page 35. Use the up/down keys of the controller to highlight the voice option. Press the right controller key to continue.

  • Page 46: Add Audio Recording

    Add audio recording Approximately 30 seconds of audio can be attached to a still image. This function is activated with the recording or playback menu. See the navigating the recording menu or playback menu sections on page 35 or 56. Use the up/down keys of the controller to highlight the add-rec option on the recording or playback menu.

  • Page 47: Delete Audio Recording

    Delete audio recording An audio track can be deleted from a still image. This function is activated with the recording menu (p. 35) or playback menu (p. 56). Use the up/down keys of the controller to highlight the add-rec option on the recording or playback menu. Press the right controller key to continue.

  • Page 48: Slow Shutter Limit

    Slow shutter limit The minimum shutter speed used for automatic exposures can be specified. This function is located on the recording menu, see the navigating the recording menu section on page 35. Use the up/down keys of the controller to highlight the slow-shutter option.

  • Page 49: Manual Exposure

    Manual exposure Exposures for still images can be specified by the photographer. The shutter speed range is 15 sec- onds to 1/1000 second. This function is located on the recording menu, see the navigating the recording menu section on page 35. Use the up/down keys of the controller to highlight the man-exposure option.

  • Page 50: Quality

    Quality The quality option allows the camera sensitivity and flash compensation to be selected, and the saturation, contrast, sharpness, and color of images to be adjusted. The color settings also affect movies. This option is located on the recording menu, see page 35. Use the up/down keys of the controller to highlight the quality option.

  • Page 51: Camera Sensitivity - Iso Speed

    Camera sensitivity – ISO speed Five camera sensitivity settings can be selected with a still image. The auto setting automatically adjusts the camera sensitivity to the light conditions between ISO 50 and ISO 200. The camera sen- sitivity can also be specified among ISO 50, 100, 200, and 400. The numerical values are based on an ISO equivalent.

  • Page 52: Saturation

    Saturation Saturation controls how vivid the colors of an image are. Saturation can be set in five levels with the quality option in the recording menu (p. 50). Contrast Contrast controls the tonal ratio of an image. Contrast can be set in five levels with the quality option in the recording menu (p.

  • Page 53: Color

    Color The red, green, and blue color channels can be adjusted in five levels with the quality option in the recording menu (p. 50). Any changes made are applied to the live image. An introduction to color In photography, red, green, and blue are the pri- mary colors.

  • Page 54: A Short Guide To Photography

    A short guide to photography Photography can be a rewarding pursuit. It is a broad and disciplined field that can take years to master. But the pleasure in making photographs and the joy of capturing a magical moment cannot be compared. The guide is an introduction to some basic photographic principles. The zoom lens not only affects how large the subject is in the picture, but it also influences the depth of field and perspective.

  • Page 55: Playback - Advanced Operation

    Playback – Advanced operation The basic functions in this mode are described in the basic playback section on pages 32 through 34. This section covers how to playback movie clips and audio tracks as well as the advanced function on the playback menu. Playing back movies and audio Movie clips (p.

  • Page 56: Navigating The Playback Menu

    Navigating the Playback menu Navigating the menu is simple. The menu button turns the menu on. The controller moves the cur- sor and changes settings on the menu. Pressing the menu button selects menu options and sets adjustments. To activate the playback menu, press the menu button.

  • Page 57: Frame-Selection Screen

    Frame-selection screen When choosing multiple files is required, the frame selection screen appears. The following indicators may be displayed: Movie file Audio track attached Voice recording Index the index playback display can be opened from the playback menu. See page 34 for more on index playback. Use the up/down keys of the controller to highlight the index option.

  • Page 58: Copy

    Copy Files can be copied between memory cards. Two memory cards must be in the camera to select this playback menu option. Before using the copy routine, confirm that the destination card has suf- ficient free memory. Use the up/down keys of the controller to highlight the copy option.
  • Page 59 Use the up/down keys to highlight the enter option. Press the right key or menu button to complete the operation. The left controller key cancels the copy rou- tine. If the select unit option was selected, the frame selection screen opens.

  • Page 60: Delete

    Delete Deleting permanently erases the file. Once deleted, a file cannot be recovered. Care should be taken when deleting images. Single, multiple, or all files on a specific memory card can be deleted with the playback menu (p. 56). The delete function can only erase unprotected files. Use the up/down keys of the controller to highlight the delete option.

  • Page 61: Adjusting The Monitor

    Use the up/down keys to highlight the enter option. Press the right key or menu button to complete the operation. The left controller key cancels the delete rou- tine. If the select unit option was selected, the frame selection screen opens.

  • Page 62: Dpof

    DPOF The DPOF (Digital Print Order Format) allows direct printing of still images from digital cameras. After creating the DPOF file, take the memory card to a photofinishing service or insert it into the memory-card slot of a DPOF compatible printer. Use the up/down keys of the controller to highlight the DPOF option.
  • Page 63 Use the up/down keys to highlight the enter option. Press the right key or menu button to complete the operation. The left controller key cancels the DPOF rou- tine. If the select unit option was selected, the frame selection screen opens.

  • Page 64: Protect

    Protect Important files can be protected. A protected file cannot be erased by any of the camera’s delete functions. However, the formatting function (p. 71) will erase all files on a memory card whether pro- tected or not. Use the up/down keys of the controller to highlight the protect option.
  • Page 65 Use the up/down keys to highlight the enter option. Press the right key or menu button to complete the operation. The left controller key cancels the protect routine. If the select unit option was selected, the frame selection screen opens. Select the image(s) to be protected by placing the red frame on the index thumbnail and pressing the menu button;...

  • Page 66: Move

    Move Unprotected files can be moved from one memory card in the camera to another. Use the up/down keys of the controller to highlight the move option. Press the right controller key to continue. Use the up/down keys to highlight the move or unit option.
  • Page 67 Use the up/down keys to highlight the enter option. Press the right key or menu button to complete the operation. The left controller key cancels the move rou- tine. If the select unit option was selected, the frame selection screen opens.

  • Page 68: Resize

    Resize A still image can be resized to a VGA (640 X 480) or QVGA (320 X 240) JPEG copy so that it may be easily transmitted by e-mail. The compression rate for resized images is not displayed when played back.

  • Page 69: Slide Show

    Slide show Each file on the memory cards are displayed automatically in order for approximately two seconds. Use the up/down keys of the controller to highlight the slide-show option. Press the right controller key to begin the slide-show playback. Press the menu button to cancel the slide show. Add audio recording Approximately 30 seconds of audio can be attached to a still image.

  • Page 70: Setup Menu

    Setup menu Navigating the setup menu The setup menu can be opened from either the recording menu or playback menu. Use the up/down keys of the controller to highlight the setup option. Press the right controller key to open the menu.

  • Page 71: Format

    Format When a memory card is formatted, all data on the card is erased. The formatting function is used to erase all data on a memory card. Before formatting a memory card, copy the data to a computer or storage device. Protecting images do not prevent them from being deleted when the card is formatted.

  • Page 72: Recording Menu Setup

    Recording menu setup A basic or detailed recording menu can be selected. Page 35 shows the detailed menu options. Select the rec menu option from the setup menu (p. 70). Use the up/down keys to highlight the menu type. Press the right key or menu button to complete the operation.

  • Page 73: Quick View

    Quick view Quick View plays back a still image for approximately three seconds after it has been recorded. Select the Quick View option from the setup menu (p. 70). Use the up/down keys to highlight on or off. Press the right key or menu button to complete the operation.

  • Page 74: Sound

    Sound The sounds used in camera operation can be turned on and off. The beep is for the self-timer countdown and warnings. The effect is for the focus signal and when the camera is turn on. The shutter sound is used when a picture is taken. Select the sound option from the setup menu (p.

  • Page 75: File-Number Reset

    File-number reset If file-number reset is active and the memory card is changed or all files are deleted, the first file saved is assigned a 0001 file number. If file number reset is off, the first image saved has a number one greater than the last file saved regardless of the number of files on the card.

  • Page 76: Language

    Language The language used in the menus can be changed. Select the language option from the setup menu (p. 70). Use the up/down keys to select the language. Press the right key or menu button to continue. The left controller key cancels the operation. Use the left/right keys to highlight “Yes.”...

  • Page 77: Custom Setup

    Custom setup The custom-setup option allows the camera functions to be customized. See the following page for information on custom functions. Select the custom option from the setup menu (p. 70). Use the up/down keys to highlight an option. Press the right key or menu button to continue. Press the left controller key to return to the setup menu.

  • Page 78: Custom Setup Notes

    Custom setup notes To set the custom-setup option, see the previous page. Flash modes This custom-setup option edits the flash modes available in the recording mode. One flash mode must be left active. For more on flash modes, see page 28. Macro –...

  • Page 79: Ae Lock

    White balance In the recording mode, press the down controller key to change the white balance. For more on white balance, see page 40. AF (autofocus) lock In the recording mode, press the shutter-release but- ton partway down to focus the camera (1). While continuing to hold the shutter-release button, press the left controller key (2) to lock the focus;...

  • Page 80: Continuous-Advance Focus Lock

    Continuous-advance focus lock A series of images can be captured by holding down the shutter-release button. This option speci- fies whether the camera focuses between each frame of the series (OFF), or fixes the focus with the first frame (ON). Reset default This function resets the camera to its default settings.
  • Page 81 Slow shutter limit Slow shutter limit default Manual exposure Quality Camera sensitivity (ISO) Flash compensation Saturation Contrast Sharpness Color Recording menu setup Quick View Information display setup Beep (Sound) Effect (Sound) Shutter (Sound) Self-timer delay Auto power off File-number reset Memory priority Add audio setup Flash modes (Custom)

  • Page 82: Transfer Mode

    Transfer mode The data-transfer mode must be specified depending on whether images are transferred to a com- puter or printed directly. The data-storage option must be selected to transfer data from the camera to a computer or when using the DiMAGE Viewer software. The PictBridge option allows images to be printed directly from the camera with a PictBridge compatible printer (p.

  • Page 83: Data-Transfer Mode

    Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions. Mac OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 – 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~10.3.2. Check the Konica Minolta web site for the latest compatibility information: North America: http://www.konicaminolta.us/...

  • Page 84: Connecting The Camera To A Computer

    Connecting the camera to a computer A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98 or 98SE, read the section on page 85 on how to install the necessary USB driver before con- necting the camera to a computer.

  • Page 85: Connecting To Windows 98 And 98Se

    Connecting to Windows 98 and 98 SE The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen.

  • Page 86: Manual Installation

    Manual Installation DATA-TRANSFER MODE To install the Windows 98 driver manually, fol- low the instructions in the connecting-the- camera-to-a-computer section on page 84. When the camera is plugged into the com- puter, the operating system will detect the new device and the add-new-hardware-wiz- ard window opens.
  • Page 87 The add new hardware wizard will confirm the location of the driver. The letter designating the CD-ROM drive varies between computers. Click “Next” to install the driver in the system. One of three drivers may be located: MNLVENUM.inf, USBPDR.inf, or USBSTRG.inf. The last window confirms the driver has been installed.

  • Page 88: Memory Card Folder Organization

    Memory card folder organization Once the camera is connected to the computer, image and audio files can be accessed by double clicking on icons. Image folders are located in the DCIM folder. To copy images and audio recordings, simply drag and drop the file icon into a location in the computer.
  • Page 89 Voice recordings also use the wav extension. When the file number exceeds 9,999, a new folder is created. The first three digits of the folder name increase by one: e.g. from 100KM017 to 101KM017. “KM” stands for Konica Minolta, and 017 indicates a DiMAGE G600 camera.

  • Page 90: Disconnecting The Camera From The Computer

    Disconnecting the camera from a computer Never disconnect the camera when data is being transferred between the camera and com- puter, Windows 98 / 98 Second Edition Confirm no files are being copied between the camera and computer. Disconnect the USB cable. Windows Me, 2000 Professional, and XP To disconnect the camera, click once on the unplug-or-eject-hardware icon located on the task bar.

  • Page 91: Macintosh

    The hardware devices to be stopped is displayed. Highlight the device by clicking on it then click “Stop.” A confirmation screen appears to indicate the devices to be stopped. Clicking “OK” will stop the device. A third and final screen appears to indi- cate the camera can be safely discon- nected from the computer.

  • Page 92: Pictbridge

    Pictbridge Confirm the transfer-mode option in the setup menu is set to PictBridge. Connect the camera to a PictBridge compatible printer using the camera’s USB cable. The larger plug of the cable is connected to the printer. Insert the smaller plug of the cable into the camera;...
  • Page 93 Paper size Printer setup 2” x 3” card 100mmX150mm Postcard 4” x 6” 8” x 10” Letter :move :print Total: 3 1600 Printing... :cancel Total: 3 1600 Printing finished. Printing Notes The following are the dimensions for postcard, L, and 2L paper sizes in both millimeters and inches for your reference: Postcard Use the up/down keys of the controller to select the...

  • Page 94: Notes On Printing Errors

    Notes on printing errors If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom- mended for the printer; no action is required for the camera. If a major printer error occurs, press the menu button to end the routine. Refer to the printer manual for the correct procedure for the printer problem.

  • Page 95: Changing The Memory Card - Data-Transfer Mode

    Changing the memory card – Data-transfer mode Never remove the card when data is being transferred between the camera and computer – the data or memory card may permanently be damaged. Windows 98 and 98 Second Edition 1. Disconnect the USB cable. 2.

  • Page 96: Appendix

    Appendix Troubleshooting The section covers minor problems with basic camera operation. For major problems or damage, or if a problem continues to reoccur frequently, contact a Konica Minolta service facility. Problem Symptom Nothing dis- The camera played on the will not work.

  • Page 97: About The Lithium-Ion Battery Charger Cord

    Green viewfinder indicator lamp blinks. Pictures are not sharp. Pictures are taken indoors or in low-light situations without flash. If the camera does not function normally, turn it off, remove and reinsert the battery, or unplug and reconnect the AC adapter. Always turn the camera off otherwise the memory card may be damaged and camera settings reset.

  • Page 98: Removing The Driver Software - Windows

    Removing the driver software – Windows 1.Insert a memory card in the camera and connect it to the computer with the USB cable. Other devices must not be connected to the computer during this procedure. 2.Right click on the My-computer icon. Select “properties” from the drop-down menu. Windows XP: from the start menu go to the control panel.

  • Page 99: Care And Storage

    Care and storage Read this section in its entirety to get the best results from your camera. With proper care, your camera will provide years of service. Camera care • Do not subject the camera to shock or impact. • Turn off the camera when transporting. •...

  • Page 100: Memory Cards

    • Touching the electrical contacts of the card with your fingers or metal objects. • Using the card beyond its life. Purchasing a new card periodically may be necessary. Konica Minolta has no responsibility for any loss or damage to data. It is recommended that a copy of the card data be made.

  • Page 101: Operating Temperatures And Conditions

    Questions and service • If you have questions about your camera, contact your local camera dealer or write to the Konica Minolta distributor in your area. • Before shipping your camera for repair, please contact a Konica Minolta service facility.

  • Page 102: Technical Specifications

    DCF 1.0, DPOF ver. 1.1, and Exif 2.2 compliant. PictBridge, Exif Print Japanese, English, German, and French. Konica Minolta NP-600 lithium-ion battery. dard with NP-600 lithium-ion battery, LCD monitor on, fullsize images (2816 X 2112), normal image compres- sion, no Quick View, no audio, flash used with 50%...
  • Page 103 Battery performance (playback): Approximate continuous playback time: 180 min. External power source: Dimensions: Weight: Operating temperature: Operating humidity: Lithium-ion Battery NP-600 Voltage: Weight: Dimensions Battery Charger BC-600 Input voltage: Weight: Dimensions Specifications are based on the latest information available at the time of printing and are subject to change without notice.
  • Page 104 Werden Sie noch heute Mitglied der Konica Minolta Photo World. Die Mitgliedschaft ist für registrierte Konica Minolta-Kunden kostenlos! Devenez dès aujourd’hui, membre du Konica Minolta Photo World. L’inscription est gratuite. © 2004 Konica Minolta Photo Imaging, Inc. under the Berne Convention and the Universal Copyright Convention. 0-43325-53331-0 9222-2744-11 IM-A402/0403...

This manual is also suitable for:

Dimage g600 - v2

Table of Contents